Outdoor Sun Shades prevent sunlight from reaching your windows and this helps to reduce glare and solar heat gain. Both can be accomplished without blocking your view out. In addition, if you enjoy spending time with family outside on your deck or patio, Outdoor Window Shades can be used to block solar heat while the breathable fabric helps to reduce humidity by allowing for the free flow of air.
Diamond Plus Outdoor Solar Shades feature high quality PVC coated polyester fabric, a 6.5’ continuous looping beaded chain, a cord tension device to keep the cord safe for small children, a Wind Flex Bungee System to secure both sides of fabric for light wind conditions and a 3.25” x 3.75” 3-sided Valance for superior strength.
Production Time: Approximately 1-3 Business Days Delivery: 3-5 Business Days After Shipment
An aluminum Valance is included with all outdoor shades.
Valance measures 3.25" x 3.75".
Valance, bottom rail, hardware, and fabric color complement each other.
Valance is 3-sided for superior strength.
6.5’ cord comes standard on right side of the shade.
Cord can be moved to the left.
Additional cord sizes available (4', 10', 14').
Cord size is length from Valance.
RollEase® Tension Device included to keep cord secure and children and pets safe.
High quality PVC coated polyester.
Fabric comes standard as a forward roll.
Heat and fire resistant for safety.
Maui: (28% Openness / 72% UV Block)
Tropic: (15% Openness / 85% UV Block)
Caribbean: (10% Openness / 90% UV Block)
Kona: (10% Openness / 90% UV Block)
Wind Flex Bungee System included to tie the shade down.
Bungee secures both sides of fabric for light wind conditions.
Features easy install system
Can easily be installed on a ceiling or wall
Installation template included
Brackets can be installed anywhere along length of Valance
Cord Tension Device
Wind Flex Bungee System
There are no upgrades available with the Diamond Plus Series but listed below are few of the standard components.
Wind-Flex Tie Down
Custom Widths Now Available
NEW! For a small surcharge, the Diamond Series can now be custom cut to any size you need from 29" to 120" inches wide. The height is 96" and cannot be adjusted, However, you do not have to roll your shade down completely; excess fabric can remain rolled up inside the cassette enclosure.
To order the correct valance width, simply measure the area you want the fabric to cover and then add 1.625 (1-5/8") to the width e.g., if the fabric width you require is 56" + 1.625, the valance width would then become 57-5/8". At this point you should check to make sure that the mounting surface is wide enough for the new valance width.
On the ordering page - select the window the stock width under "Your Window Size" that is greater than, but closest to the new valance width. In the example above you would select 72". Then, under "Options and Upgrades" select "custom size" on the "Stock of Custom Size" drop-down menu and then 57-7/8" on the "Valance Width" drop-down. That's it - it's as easy as that.
Note: Custom cut-downs change the production time from 1-3 business to 5-7 business days.
The illustration above tells you how much mounting space is required for the size of shade you select as well as how much space the fabric will cover. Using the illustration first determine the size of the area you want the fabric to cover and then decide if you have enough flat mounting space in terms of the width required for the valance.
The hardware for all Diamond Plus shades, regardless of fabric color, is OIL RUBBED BRONZE Cord, valance, cord safety device, brackets, are oil rubbed bronze.
All stock shades have a 78" cord located on the right side of the shade. Additional cord lengths are available.
All Diamond Plus shades utilize our "wind flex bungee system" to secure the bottom of your shade. This system secures the bottom of your shade to prevent flapping during light wind conditions. The shade should be rolled up during moderate to extreme wind conditions.
Please remember that this is a do-it-yourself site and that the products on it are custom-built to your specifications and cannot be returned for any reason other than warranty repair/service. If you have any questions or concerns please email us before you order and we'll help you in any way we can.